
Sprayer Gun Set Hey everyone, and welcome to my little corner of the plumbing world. I’m a bath mixer supplier, so I get asked all sorts of random questions that you’d never think someone would care about. But today, one question popped up more times than I can count: “Can a bath mixer be used for a shower?” Let me tell you, this isn’t just a random plumbing hack—this is something I get DMs about weekly, so I’m breaking it down like I would for my next-door neighbor who’s renovating their bathroom on a tight budget. Let’s dive in, no boring jargon, I promise. First, let’s get one thing straight: what even is a bath mixer? For anyone who’s not in the biz, a bath mixer is that tap setup you see by the tub—usually two handles (or one, these days) for hot and cold water, right? You turn it, and water comes out the spout to fill the tub. Some have a little diverter lever too, that tiny switch you flip so water stops coming out the spout and starts going up to the showerhead. That’s the key piece here—most bath mixers have that diverter, so that’s why people are curious. Now, the short answer is: sometimes, but it’s not that simple. I’ve seen people do this, I’ve seen it go wrong, and I’ve seen it totally work if you do it right. Let’s start with the “why” people ask this. Most of the time, it’s budget. People already have a bath mixer, they don’t want to drop extra cash on a separate shower mixer, and they’re thinking “hey, the diverter moves water, that’s all a shower needs.” Fair point, I get wanting to save money. Or maybe their small bathroom only has space for one tap setup, not two separate ones for tub and shower. Makes sense for a powder room or a tiny en-suite. But before you grab your drill and start swapping parts, let’s talk about the science of water pressure—this is non-negotiable, guys. Bath spouts are designed to handle low pressure. Like, super low pressure. They’re wide, right? The whole point is to fill a big tub quickly with as much water volume as possible. A showerhead, though? It needs pressure to work properly. If your main shower is low pressure, it’ll feel like you’re standing under a drippy faucet, even if you flip that diverter. That’s where people mess up. I had a customer last year, let’s call him Mike, who did this on a whim. He had a bath mixer in his guest bath, thought he’d add a showerhead without paying a plumber. He flipped the diverter, and… nothing. Just a tiny trickle. He texted me panicking, and I told him his home’s pressure was only 10 PSI—way too low for a shower, even with a diverter. We ended up adding a small pump for his whole system, and now he swears by that setup. So first rule: check your water pressure. What’s a good number? For a shower, you want at least 20 PSI, ideally 40-60 PSI. You can get a cheap pressure gauge at the hardware store for like $10, no need to call a pro for that. Now, next big thing: the diverter. Not all bath mixers have a diverter. I’ve sold a ton of basic bath mixers for small bathrooms that don’t have that little switch—they just stay on the tub spout. If yours doesn’t have a diverter, you’re not out of luck, but you’ll have to add one. Wait, how? You can get an after-market diverter spout—literally replace your existing tub spout with one that has a lever on it. That’s a super easy DIY job, most of the time you just unscrew the old one, wrap some Teflon tape on the threads, and screw the new one on. Takes 10 minutes, no plumber needed. But if your bath mixer does have a diverter, that’s a good start—just make sure it’s the right type. There are two main types of diverters, honestly: the ones that lift up (usually on the spout, like a little knob) and the ones that twist or flip (on the valve itself, behind the wall). Lifting diverters are usually for older, lower-volume tubs, so they might not handle shower pressure as well. Flip diverters are newer, and they’re built for higher pressure, so those are better if you’re planning to use it for a shower. That’s a quick check when you’re looking at your own mixer—if you can’t remember which diverter you have, go look at your tub right now. If there’s a little knob sticking up on the end of the spout, that’s a lift diverter; if there’s a lever on the wall where the tap handles are, that’s a flip diverter. Got it? Now, let’s talk about the actual setup, because you can’t just hook any showerhead to a bath mixer. First, the shower arm. The arm that connects the showerhead to the wall—you can get adapters, but make sure it’s the right size. Most shower arms are ½ inch, which is standard, so that’s usually not a problem, but double-check your mixer’s outlet. Wait, also, the showerhead itself. If you have low pressure, don’t get that fancy rain showerhead that has 100 spray nozzles—those need way more pressure to work. Get a low-flow, high-efficiency showerhead, or a pressure-boosting one. Those are designed to work even when your water pressure is on the lower side, so they’ll pair way better with a bath mixer. I sell a bunch of these, actually—customers who convert their bath mixers love them because they save water too, which is a bonus. Now, the stuff that goes wrong when people do this, so you know what to avoid. Number one mistake: not checking pressure, like Mike did. Don’t assume your pressure is fine—if you live in an old apartment with several units sharing a water line, your pressure is probably lower than a house with its own tank. Second mistake: using a cheap showerhead that doesn’t handle pressure. I had another customer, Lisa, who used a random showerhead she got at the dollar store, and when she flipped the diverter, the whole spout leaked like crazy. Turned out the cheap showerhead had a plastic thread that couldn’t handle the pressure, so it blew a tiny crack. Ended up costing her more to fix the leak than if she’d bought a decent showerhead to begin with. Third mistake: not checking if the bath mixer is actually plumbed for hot and cold. Wait, that sounds silly, but some older bath mixers are only plumbed for hot water (yes, those exist—weird, I know). If that’s the case, you can’t use it for a shower, because you’ll only get scalding hot water. No good. So how do you check that? Turn on both handles, if you get hot and cold, you’re golden. If only one works, that’s a problem. Now, let’s get into when this is a good idea, versus when you should just bite the bullet and get a separate shower mixer. Good reasons to convert your bath mixer to a shower: you’re on a super tight budget, you have a tiny bathroom with no space for two tap sets, you already have a bath mixer that’s in good shape and you don’t want to replace it. Bad reasons: your pressure is under 15 PSI and you don’t want to add a pump, you want a high-end rainfall shower setup, your existing bath mixer is old and rusty (why not replace it with a proper shower mixer anyway, while you’re at it?). Wait, and one more thing: building codes. I know, I know, boring, but it matters. In some areas, if you’re converting a tub to a shower, you need a pressure-balancing valve to stop scalding. A lot of bath mixers don’t have pressure-balancing, so you might need to add that if you live in a place with strict plumbing codes. Just check your local building department—most have info online now, so you don’t have to make a phone call if you don’t want to. Now, let’s talk from my perspective as a bath mixer supplier, because I’m not here just to say “yes you can” or “no you can’t.” I actually sell a line of bath mixers that are specifically designed to work as showers, too. They have reinforced diverters that handle up to 80 PSI, pressure-balancing valves, and they come with adapters so you can hook up a showerhead right away. I’ve had customers buy these for their guest baths, because they only use the shower a couple times a month and the tub the rest of the time—so it’s like getting two fixtures in one. Smart, right? I always tell my customers: if you’re on the fence about converting, just do a test first. Turn on your bath mixer, get a bucket, flip the diverter, and see how much water comes out. If it’s a strong stream, you’re good to go. If it’s a trickle, you know you need to add a pump or get a showerhead that boosts pressure. That test takes 2 minutes, no tools needed, no commitment. No point in ripping out walls just to test a setup. I also get asked if you can remove the tub spout entirely and just have a shower. Again, depends. If your bath mixer has a diverter valve behind it, you can cap the tub spout and just have the shower arm, but you have to make sure the plumbing can handle it. If you don’t have a diverter, you’ll need to install one either on the spout or the valve. Not rocket science, but again, double-check the pressure. Now, let’s address the elephant in the room: is this safe? I get that. A lot of people think bath mixers aren’t built for shower pressure, so they’ll break and leak all over your bathroom. If you do it right, no. If you cut corners, yes. I’ve had a customer who’s had his converted bath mixer shower for 5 years, no leaks, no issues. He’s had friends who tried to do it with a cheap mixer that didn’t have a reinforced diverter, and it cracked after a year. So it’s all about parts and installation. Pro tip: if you’re not comfortable with DIY plumbing, hire a pro for an hour. It’ll cost you $100 or so, but it’s way better than having a leak that ruins your floor or walls. I’ve seen that happen too—customer tried to do it himself, didn’t wrap the Teflon tape right, had a leak that soaked his drywall, had to replace half the bathroom. Way more expensive than paying a plumber for an hour. Let’s wrap this up, because I know you guys don’t want a 10-page essay. The short, actionable takeaways: 1. Check your water pressure first—aim for 20+ PSI. 2. Confirm your bath mixer has a diverter; if not, add an after-market diverter spout. 3. Use a pressure-boosting showerhead, skip the fancy high-volume ones if your pressure is low. 4. Test the water flow before committing, no need to rip anything out first. 5. If you’re unsure about plumbing or pressure, hire a pro. Now, if you’re thinking about actually doing this, or if you’re in the market for a bath mixer that works as a shower, feel free to reach out. I’m here to help, whether you just need a quick question answered or you want to pick out a mixer that fits your bathroom. I’m not pushy, I just know how frustrating it is to get a plumbing project wrong because you didn’t ask the right questions. Don’t overcomplicate this—most people can convert their bath mixer to a shower without breaking the bank, as long as you do the checks first. I’ve been supplying bath mixers for years, and this is one of the most common questions I get, so I wanted to break it down straight, no fluff. If you have more questions, hit me up. Now go check that pressure gauge—you’ll be showering from your bath mixer in no time. References: 1. International Plumbing Code, Section 423: Water Pressure Requirements for Fixtures 2. Plumbing-Heating-Cooling Contractors Association, Residential Shower Conversion Guide 3. EPA WaterSense, High-Efficiency Showerhead Performance Standards Bath Mixer

Fujian Feiyasi Kitchen Technology Co., Ltd.
Fujian Feiyasi Kitchen Technology Co., Ltd. is one of the most experienced bath mixer manufacturers and suppliers in China, featured by quality products and low price. Please rest assured to wholesale CE approved bath mixer in stock here and get quotation from our factory. Customized orders are welcome.
Address: 252 Maoji Middle Road, Shengxin Town, Nan’an City, Fujian Province
E-mail: sales@fyassi.com
WebSite: https://www.fyassibath.com/