If you’ve ever stood in a Fiat service bay or knelt beside your own car, staring at a worn wheel hub and thinking, “What on earth is the part number for this specific component?” you’re not alone. As someone who’s spent 12 years supplying Fiat wheel hubs to independent garages, online auto parts retailers, and individual Fiat owners across North America and Europe, I get this question at least a dozen times a week. It’s not just a random string of numbers—it’s the key to a wheel that fits, works, and keeps a Fiat’s handling reliable for thousands of miles. Today, I’m breaking down how to actually find that part number, why guessing doesn’t work, and what makes our work as suppliers different when it comes to getting the right part for your specific Fiat. Fiat Wheel Hub

First, let’s get one thing straight: Fiat isn’t a one-size-fits-all brand. A 2012 Fiat 500, a 2018 Fiat 124 Spider, and a 2023 Fiat Ducato aren’t just different models—they’re built on entirely different platforms, with different load ratings, brake sizes, and wheel bolt patterns. That means the wheel hub for a base-model 500 isn’t the same as one for a turbocharged 500 Abarth, even if they look identical at a glance. A lot of people make the mistake of searching “Fiat wheel hub part number” online and picking the first result, but I’ve seen that lead to parts that are too narrow, don’t match the bearing capacity, or even have the wrong bolt circle that makes wheel installation impossible.
So, how do you get the correct part number for your specific Fiat? The process starts with three non-negotiable details, and if you skip even one, you’ll end up with the wrong part. The first is your Fiat’s vehicle identification number, or VIN. The VIN is a 17-character code that’s unique to every car, and it’s stamped on the dashboard (visible through the driver’s side windshield) and often on the driver’s side door jamb or engine bay firewall. For example, a 2015 Fiat 500c with a 1.4L engine will have a different hub than a 2015 Fiat 500 Abarth with the same engine—just a different trim level. The VIN pulls up Fiat’s official build sheet, which lists every component used on that exact car, down to the hub part number.
The second detail is the wheel hub’s own number, if you can remove it safely. If you’re replacing a hub because the bearing is making noise or the mounting flange is rusted, you can remove the wheel, pull the brake caliper and rotor, and take off the old hub. Most original equipment (OE) and high-quality aftermarket hubs have a part number stamped directly on the outer flange or the inner bearing race. I always tell customers to snap a photo of this number before they remove the old hub entirely—just in case something goes wrong during disassembly. I had a customer last year who forgot to do that, and when he finally got the old hub off, the number was half covered in rust. He ended up waiting three extra days to get the right part, which cost him more in rental car fees than the hub itself.
The third detail is the hub’s application: front or rear, left or right. This is a small but critical point. For front-wheel-drive Fiats (which includes most 500 models, the 124 Spider, and the smaller hatchbacks), front and rear hubs are different in both design and weight. The front hubs also have to handle steering forces, so they have different bearing tolerances than rear hubs, which only support the weight of the back of the car. A common mistake here is assuming the driver’s side and passenger side hubs are the same—for many Fiats, especially older models like the 2000s Fiat Punto, the front hubs have different part numbers for left and right, because of how the steering knuckle is machined.
Now, let’s talk about why so many of the online part databases get this wrong. A lot of third-party auto parts sites use generic model-year matches, not specific VIN or hub numbers. So they’ll list a “Fiat 500 2010-2019 wheel hub” as a single part number, when in reality, that model range has six different hub part numbers, depending on trim, engine, transmission, and whether it has ABS (anti-lock braking system) or not. ABS is another big one—most newer Fiats have wheel speed sensors built into the wheel hub. If you buy a hub without the ABS sensor, even if it fits physically, it won’t work with your car’s braking system, and the ABS light will stay on permanently. I once had a garage come to me with three wrong hubs he’d ordered online for a fleet of 10 500s—all of them had the wrong ABS wiring harness connector, so he had to return them and pay restocking fees. That’s the difference between ordering from a supplier who checks those details and one that just spits out generic numbers.
As a Fiat wheel hub supplier, my job isn’t just to send out a part number—it’s to make sure the part number matches your exact car. We keep a database of every Fiat model we’ve supplied parts for over the last 15 years, cross-referencing VINs, hub stamp numbers, and build specs to eliminate guesswork. When a customer reaches out to us, the first thing I ask for is their VIN, and I’ll verify the hub number against Fiat’s official OE specs before sending over a part number. We also test every hub we ship for load capacity and bearing performance, because a wheel hub that fails isn’t just an inconvenience—it’s a safety hazard. Last year, we had a customer who installed a cheap aftermarket hub he’d found on a marketplace site, and it failed at 12,000 miles, causing a wheel to come loose while he was driving on the highway. He ended up replacing his entire transmission because the wheel damaged the axle, and he came back to us for the correct hub after that—he said he learned the hard way that the right part number isn’t just a code, it’s what keeps you safe on the road.
Another point to note: for older Fiats, pre-2005 models, the part numbers might not be as well-documented in generic databases. A 2003 Fiat Uno or a 1999 Fiat Strada might not have their hub numbers listed on most big auto parts sites, because the demand for replacement parts is lower than it is for newer models. That’s when reaching out to a supplier that specializes in Fiat parts is invaluable. We keep parts for classic Fiats in our warehouse too, and we cross-reference old service manuals and Fiat’s historic parts catalogs to find the exact part number for these older vehicles. I remember a customer who had a 1987 Fiat 124 Sport Spider that he’d restored over 10 years; he couldn’t find a replacement hub anywhere, and he almost sold the car before we located the original part number using Fiat’s old microfiche service. That’s the kind of work that generic part sites can’t do—they don’t have the historical data or the Fiat-specific knowledge to track down those rare part numbers.
Let’s also address a common myth: you don’t have to buy an OE (original equipment) part to get the correct part number. High-quality aftermarket Fiat wheel hubs are manufactured to the exact same specifications as the parts that come on the car from the factory, and they’ll have the same part number stamped on them (or an exact cross-reference number that’s approved by Fiat for replacement). The key is to avoid cheap, no-name aftermarket hubs that cut corners on bearing quality or material. We only supply hubs from manufacturers that are certified to produce parts for Fiat’s OE suppliers, so you can trust that the part number will match, and the hub will last as long as the OE part.
So, to recap: the part number for a specific Fiat wheel hub isn’t something you can find with a quick Google search. To get the right number, you need your Fiat’s VIN, the hub’s own stamp number (if you’re replacing it), and whether you need a front or rear, left or right hub. Generic part databases will often give you wrong numbers, especially for older or higher-trim models, so working with a Fiat-specific supplier makes all the difference. The right part number ensures your hub fits, works with your ABS, matches your car’s load capacity, and keeps you safe on the road.

If you’re working on a Fiat and aren’t sure about the correct wheel hub part number, don’t guess. Reach out to us with your VIN, the year and model of your Fiat, and whether you need a front or rear hub. We’ll help you confirm the exact part number, send you a high-quality, Fiat-approved hub, and answer any questions you have about installation or compatibility. No more wrong parts, no more waiting around, no more worrying about whether the hub will work once it’s on your car. We’ve been doing this for years, and we know exactly how to get you the right part the first time.
Great Wall Wheel Hub REFERENCES
- Fiat Group Automobiles. (2005). Fiat Official Parts Catalog: Model Year 1995-2005. Turin, Italy: Fiat S.p.A.
- National Highway Traffic Safety Administration. (2018). Wheel Hub and Bearing Assembly Safety Standards for Passenger Vehicles. Washington, D.C.: U.S. Department of Transportation.
- Automotive Aftermarket Suppliers Association. (2020). Fitment Verification Best Practices for Specialty Vehicle Parts. McLean, VA: Motor and Equipment Manufacturers Association.
- Fiat Chrysler Automobiles. (2015). Technical Service Bulletin 15-023: Wheel Hub Identification and Replacement Guidelines. Auburn Hills, MI: FCA US LLC.
- European Automotive Parts Manufacturers Council. (2019). Quality Standards for Aftermarket Wheel Hubs for European Light Vehicles. Brussels, Belgium: European Automobile Manufacturers Association.
Zhejiang J.B Auto Parts Co., Ltd.
As one of the most professional fiat wheel hub manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to wholesale durable fiat wheel hub at competitive price from our factory.
Address: NO.55, JINXING ROAD, BINHAI INDUSTRIAL PARK, DONGCHEN, XIANGSHAN, NINGBO, ZHEJIANG, CHINA
E-mail: Sales@jbgbearing.com
WebSite: https://www.jbgwheelhub.com/