Posted in

What are common types of cobalt based alloy?

When I started my career as a cobalt based alloy supplier fifteen years ago, I quickly learned that the biggest mistake new buyers make is assuming all cobalt alloys are the same. I’ve had conversations with aerospace engineers wondering why a part failed prematurely, because they grabbed a “cobalt alloy” from a catalogue without checking if it was the right type for their high-temperature turbine blades. I’ve also worked with medical device makers who thought any cobalt alloy would work for spinal implants, only to realize they needed a grade with exceptional biocompatibility and wear resistance. Today, I want to break down the most common types of cobalt based alloys, explain their key uses, and share what every buyer should know when selecting the right one for their project. Cobalt Based Alloy

Cobalt based alloys get their unique properties from their core element: cobalt, which makes up 30 to 65 percent of most commercial grades, with the remainder blended with chrome, nickel, tungsten, molybdenum, and sometimes small amounts of carbon or iron. Unlike steel, which can weaken at high temperatures, cobalt alloys retain their strength, corrosion resistance, and stability even when exposed to extreme heat or harsh chemicals. That’s why they’re not just a niche material—they’re critical for industries that can’t afford part failure. Let’s start with the type most people in the industrial space know well: superalloys, also called heat-resistant cobalt alloys.

Superalloys are the workhorses of high-temperature applications. These alloys are formulated to withstand continuous use at temperatures up to 1,800 degrees Fahrenheit, with many grades holding their structural integrity under cyclic heating and cooling that would crack or warp other metals. The two most common superalloy types in this category are Haynes alloys and Stellite alloys, though I see Haynes 25 and Haynes 188 as the go-to for most aerospace and energy clients. Haynes 25, for example, is a cobalt-chrome-tungsten alloy with about 50% cobalt, 20% chrome, and 15% tungsten. What makes it stand out is its incredible thermal stability—maintaining 80% of its room-temperature strength at 1,400 degrees Fahrenheit for extended periods. I’ve supplied Haynes 25 to gas turbine manufacturers for combustion liners and nozzle components, where even a small deformation can lead to thousands of dollars in downtime. Haynes 188, on the other hand, adds lanthanum to improve oxidation resistance, making it ideal for jet engine combustors and rocket thrust chambers where exposure to hot, oxygen-rich gases is constant.

Stellite is another well-known cobalt superalloy, but it’s often grouped separately because it’s designed more for wear resistance than pure high-temperature strength. Wait, actually, many metallurgists categorize Stellite as a wear-resistant cobalt alloy, which segues into our next group: wear-resistant cobalt alloys. These alloys are engineered to resist abrasion, erosion, and adhesive wear—meaning they don’t gall or stick to other metal surfaces when under pressure. They achieve this through high carbon content, which forms hard carbides (like chromium carbide or tungsten carbide) that act like tiny, tough particles embedded in the softer cobalt matrix. Stellite 1 and Stellite 6 are the most common here, with Stellite 6 being the most widely used wear cobalt alloy on the market today. Stellite 6 has around 60% cobalt, 28% chrome, and 1.2% carbon, creating chromium carbides that give it a hardness of about 40 HRC when cast—hard enough to resist wear from sand, slurry, and metal-on-metal contact. I regularly supply Stellite 6 to oil and gas operators for valve trims, pump impellers, and drill bits, where these parts are exposed to harsh, abrasive drilling fluids. I also work with paper mill manufacturers who use Stellite to line rolling rolls and cutting blades, as the pulp slurry and wood fibers would wear away standard steel parts in months if not lined with Stellite. A lot of people ask me if Stellite is only for industrial uses, and the answer is no—we also supply it to mining companies for conveyor system components that need to resist wear from rock and ore.

Third on our list is biocompatible cobalt alloys, a category that’s grown dramatically over the last 20 years as medical technology advances. These alloys are formulated to be non-toxic, resistant to corrosion in the body’s fluids, and have the right combination of strength and flexibility for orthopedic and dental implants. The most common grade here is CoCrMo, short for cobalt-chromium-molybdenum, often referred to as ASTM F75 or F799 depending on the specific grade. CoCrMo has about 28% chrome and 6% molybdenum, with low carbon content to improve ductility (important for implant parts that need to move or bear weight, like hip stems or knee components). What makes CoCrMo stand out is its wear resistance in the body—way better than titanium for metal-on-metal joint replacements, though I should note that modern designs prefer metal-on-polyethylene now, but CoCrMo is still used for the implant’s core structural parts. I’ve also supplied CoCrMo to dental implant manufacturers for abutments and crowns, where biocompatibility and strength against chewing forces are non-negotiable. There’s another biocompatible cobalt alloy gaining traction today: L-605, which is essentially Haynes 25 optimized for medical use, with strict purity standards to eliminate any trace elements that could cause adverse reactions in the body. We’ve worked with startups developing spinal fusion devices that need to be both biocompatible and strong enough to support the spine, and L-605 is their material of choice because it doesn’t corrode in cerebrospinal fluid.

Wait, should I mention magnetic cobalt alloys? I almost forgot that category, though it’s less common than the three above, but still important for certain industries. Magnetic cobalt alloys, like Alnico and Cunife, are used in permanent magnets for sensors, motors, and loudspeakers. Cobalt adds coercivity—meaning the magnet resists demagnetization—so these alloys are more stable than iron-based magnets in high temperatures. Alnico, which is an alloy of aluminum, nickel, and cobalt, was widely used in old car speedometers and guitar pickups, and while neodymium magnets have taken over most consumer applications, Alnico is still used in high-temperature sensors for aerospace and industrial furnaces where neodymium would lose its magnetism. I’ve supplied small batches of Alnico to a aerospace component manufacturer that uses the magnets in temperature sensors for jet engines, because neodymium magnets can degrade at temperatures above 300 degrees Fahrenheit, while Alnico holds its magnetism up to 900 degrees. That said, magnetic cobalt alloys make up a small fraction of my business compared to superalloys, wear-resistant, and biocompatible grades, so they’re more of a niche type but worth noting for anyone working in precision sensors.

Now, I want to talk about what every buyer needs to check when choosing a cobalt alloy, because even within these common types, there are critical differences. For example, when I get a request for a “cobalt alloy for a turbine blade,” my first question is: “Is it for static parts or rotating parts?” Haynes 25 works for static combustion liners, but rotating turbine blades need a superalloy with higher creep resistance, like Haynes 230, which adds aluminum and titanium to form a protective oxide layer that resists oxidation at even higher temperatures. Another example is Stellite: Stellite 1 has higher carbon content than Stellite 6, making it harder but more brittle, so Stellite 1 is used for parts that don’t see impact, while Stellite 6 is better for applications with moderate impact and wear. I’ve had a customer come to me a few years ago who ordered Stellite 1 for pump impellers that were exposed to frequent impact from large rock particles, and within three months, the impellers cracked. That’s the kind of mistake you avoid when you know the difference between Stellite grades. For medical buyers, the purity standard is non-negotiable—ASTM F75 requires strict limits on lead, nickel, and other trace elements that could cause allergic reactions, and I always remind them to verify that their supplier provides material test reports (MTRs) that confirm the alloy meets these standards. If a supplier can’t give you an MTR, that’s a red flag—cobalt alloys for medical use can’t have unknown impurities.

I also want to address a common misconception I hear all the time: that cobalt alloys are only for extreme, high-cost applications. Yes, they’re more expensive than carbon steel or even stainless steel, but when you calculate total cost of ownership, they’re often cheaper. A standard steel pump impeller might cost $500 and last 6 months, while a Stellite-lined impeller costs $2,000 and lasts 5 years. That’s 10x the lifespan, so the total cost over 5 years is $1,000 for Stellite vs $1,000 for steel, and that doesn’t include the cost of downtime to replace the impeller. I tell every new customer to do that simple calculation before writing off cobalt alloys as too expensive.

As a cobalt based alloy supplier, my job isn’t just to send you a box of metal—it’s to help you pick the right alloy for your specific use case. I’ve worked with everyone from small local medical device shops to Fortune 500 aerospace companies, and the one thing that’s consistent is that everyone wants a material that works, delivers consistent results, and doesn’t fail when it matters. If you’re working on a project that needs high-temperature strength, wear resistance, biocompatibility, or magnetic stability, a cobalt based alloy is almost certainly the best choice, but not all cobalt alloys are created equal.

Whether you need a small batch of CoCrMo for a custom implant, a large order of Stellite for valve trims, or a superalloy for jet engine components, I can provide you with material test reports, technical data sheets, and guidance to make sure you get the right grade for your needs. I’ve been in this industry long enough to know that the wrong material choice can delay a project, increase costs, or even lead to safety issues, so I take the time to ask questions and help you avoid those problems.

If you’re ready to discuss your next project and find out which common cobalt based alloy will work best for your application, feel free to reach out and connect with my team for a detailed consultation. We can talk about your requirements, share sample materials if needed, and provide a tailored solution that fits your budget and timeline.

References

Inconel Alloy ASM International. (2020). Metals Handbook: Volume 2: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. ASM International.
Haynes International. (2023). Haynes Alloy Data Sheets. Haynes International Inc.
Kurtz, S. M. (2019). Orthopedic Materials: Properties, Testing, and Applications. Woodhead Publishing.
Stellite LLC. (2022). Stellite Alloys Technical Guide. Stellite LLC.


Jiangsu Xurui Metal Group Co., Ltd.
With abundant experience, we are one of the most professional cobalt based alloy manufacturers and suppliers in China. We are committed to providing high quality metal products for global clients. Please feel free to wholesale bulk high-grade cobalt based alloy in stock here from our factory.
Address: 32-117, South Stainless Steel Market, Xinwu District, Wuxi, Jiangsu, China
E-mail: Mia@xuruimetal.com
WebSite: https://www.xurui-steel.com/