{"id":876,"date":"2026-11-20T09:02:40","date_gmt":"2026-11-20T01:02:40","guid":{"rendered":"http:\/\/www.jsbudea.com\/blog\/?p=876"},"modified":"2026-11-20T09:02:40","modified_gmt":"2026-11-20T01:02:40","slug":"how-to-adjust-cad-model-for-material-shrinkage-in-cam-4c6e-061e3e","status":"publish","type":"post","link":"http:\/\/www.jsbudea.com\/blog\/2026\/11\/20\/how-to-adjust-cad-model-for-material-shrinkage-in-cam-4c6e-061e3e\/","title":{"rendered":"How to adjust CAD model for material shrinkage in CAM?"},"content":{"rendered":"<p>Hey everyone, let\u2019s cut to the chase\u2014if you\u2019re deep in the CAD\/CAM game, you know that one tiny, annoying sneaky thing that can turn a perfect 3D model into a total mess when you hit the CNC machine: material shrinkage. I\u2019ve been in this trenches for 10 years, working with shops, prototyping teams, and manufacturers, and let me tell you, shrinkage isn\u2019t just a \u201cminor detail\u201d anymore\u2014it\u2019s the #1 silent killer of first-run parts, wasted material, and missed deadlines that no one talks about enough. As a CAD\/CAM materials supplier, I\u2019ve seen so many teams fumble this part: they crank out a CAD model, plug it straight into CAM, and when they pull the part off the machine it\u2019s slightly too small (or way too big, depending on the material) and suddenly they\u2019re re-running the job, eating cost, and missing client deadlines. Today I\u2019m walking you through exactly how to adjust your CAD model for shrinkage in CAM, no jargon, no fancy overcomplicated steps\u2014just what actually works. <a href=\"https:\/\/www.aiditeglobal.com\/cad-cam-material\/\">CAD\/CAM Material<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.aiditeglobal.com\/uploads\/48215\/small\/5-axis-dental-metal-milling-machine3ca5f.jpg\"><\/p>\n<p>First, let\u2019s get one thing straight: shrinkage isn\u2019t the same for every material. I\u2019ve got a wall of test data in my office, and I can tell you a 10% glass-filled nylon shrinks way differently than a carbon fiber peek, or even cast aluminum, or that random new biopolymer your team is testing. A lot of newbies just grab a generic shrinkage number off a material data sheet and call it a day\u2014big mistake. Those numbers are usually average, right? But factors like how fast you\u2019re cutting, how much heat your CNC\u2019s putting out, even if you\u2019re using coolant, can shift that number by 10-20% easy. I once had a customer who swore their 30% glass polycarbonate had 0.5% shrinkage, so they scaled their CAD model by 1.005\u2026 and their final part was 0.02 inches too small. Turned out they were running a 10k rpm end mill with zero coolant, so the material expanded mid-cut, then shrank as it cooled, way more than the sheet\u2019s average number. So first rule: stop guessing your shrinkage rate. Test it with your exact process.<\/p>\n<p>Wait, let\u2019s back up\u2014what even is material shrinkage when we\u2019re talking CAD\/CAM? Shrinkage happens when your raw material (whether it\u2019s a billet, a 3D print, a mold insert, whatever) is heated up during cutting, then cools back down to room temp, and contracts a little. For polymers, it\u2019s way worse than metals because polymers have that molecular relaxation thing going on\u2014they don\u2019t just bounce back, they settle into a smaller shape. For metals, it\u2019s more thermal expansion and contraction, but even aluminum can shrink 0.2% if you\u2019re cutting a big solid block without proper cooling. So adjusting your CAD model isn\u2019t just scaling it up, it\u2019s accounting for that contraction so the final part ends up exactly to spec.<\/p>\n<p>Now, how do you actually adjust that CAD model for shrinkage in CAM? Let\u2019s break this down step by step, starting before you even open your CAM software, because that\u2019s where most teams waste time.<\/p>\n<p>First step: Lock in your exact material and process. Like I said earlier, generic data is garbage. Last month I sent a new batch of our custom glass-filled PETG test billets to a local prototyping shop, and they used the old shrinkage number they had from 2 years ago on a different batch of PETG, and their first 10 parts were all off by 0.03 inches. I had to send them a free shrinkage test kit\u2014just a 2x2x2 inch cube cut from the same billet they were using\u2014and told them to mill it, measure it after it cooled, and that\u2019s their real shrink rate. Most teams skip this test, and that\u2019s 80% of their shrinkage issues. The test takes 10 minutes max: mill a simple cube, let it sit on the bench for 15 minutes to cool fully (don\u2019t measure it hot! That\u2019s a huge mistake), then measure all three dimensions. The shrink rate is (original CAD dimension \/ final measured dimension) or (1 \/ shrink factor) \u2014 so if your cube is 2 inches CAD, comes out to 1.99 inches, your shrink factor is 2 \/ 1.99 = ~1.005, or 0.5% shrink. Simple.<\/p>\n<p>Second step: Choose the right shrinkage method in your CAM software. Wait, a lot of people don\u2019t know that CAM tools don\u2019t all do shrinkage adjustment the same way. Let\u2019s keep it real\u2014most guys use SolidWorks, Fusion 360, Mastercam, or RhinoCAM, right? I\u2019ve worked with all of these, so let\u2019s break down what works for each, no fancy stuff. First, avoid the \u201cuniform scale\u201d trick that a lot of new people use\u2014wait, why? Because uniform scaling stretches every dimension the same, but a lot of polymers shrink anisotropically. What\u2019s anisotropic? That means they shrink differently along the length vs. the width vs. the height, because of how the molecular chains align in the raw billet. For example, extruded nylon billets shrink more along the extrusion direction than perpendicular. If you just uniformly scale that model, you\u2019ll get a part that\u2019s slightly warped, not just undersized. Oh, and metals? Most metals are isotropic, so uniform scaling works, but still\u2014test it first.<\/p>\n<p>So for anisotropic materials (90% of polymers and some composites), use the \u201cnon-uniform scaling\u201d or \u201cdirectional shrink\u201d option in your CAD software first, before even exporting to CAM. Wait, but some teams do the scaling in CAM, which is totally fine too\u2014just make sure you\u2019re not doubling up on scaling. If you scale in CAD then scale again in CAM, you\u2019ll get a way too big part. That\u2019s another mistake I see all the time. So pick one place to do the scaling: either CAD, or CAM, not both.<\/p>\n<p>Let\u2019s get specific for common tools. If you\u2019re using Fusion 360 (super popular for small shops), here\u2019s how to do it right: after you\u2019ve got your test shrink rate, go to Modify &gt; Scale, select your entire model, make sure you pick \u201cNon-uniform\u201d instead of \u201cUniform\u201d, then enter the X, Y, Z scale factors based on your cube test. Wait, but if you\u2019re working with a mold or a part that has complex curves, don\u2019t forget to apply the scale to features too\u2014some people scale the body but not the fillets, so those come out wrong. For Mastercam (used by a lot of high-volume shops), they have a \u201cShrinkage Compensation\u201d feature right in the operation setup, which lets you input directional shrink factors without modifying the original model. That\u2019s actually super handy because it lets you adjust the shrink rate later without redoing your whole CAD file. For SolidWorks, it\u2019s similar to Fusion 360: use the Scale feature, non-uniform, and make sure you select the \u201cUniform scaling\u201d only if your material is isotropic.<\/p>\n<p>Third step: Account for post-processing effects. Wait, this is the part that most tutorials skip, and it\u2019s the reason parts still come out wrong even after you adjusted the model for shrinkage. What post-processing? If you\u2019re milling a part, and you have to deburr it, or sand it, or tumble it\u2014some of those processes can actually remove material, so you might need to adjust your final model to be slightly oversize to account for that. For example, if you\u2019re tumbling a polycarbonate part to smooth the edges, that can remove 0.01 inches per edge, so you might want to add a little extra to your model when adjusting for shrinkage. Or if you\u2019re heat treating a metal part after milling, that can cause additional shrinkage, so you have to include that in your shrink rate too. I once had a customer milling a stainless steel bracket, and they forgot that heat treatment added 0.1% shrinkage, so their adjusted model was only set for machining shrinkage, not heat treat, and the bracket was too small after post-processing. Moral of the story: don\u2019t just adjust for machining shrinkage\u2014account for every step the part goes through after it comes off the CNC.<\/p>\n<p>Fourth step: Test, iterate, document. This is non-negotiable. No matter how much data you have, every job is a little different. I always tell my customers: do a test run first. Mill a prototype part (not a full production run), measure every critical dimension after all post-processing, then adjust your shrink rate accordingly for future runs. And document everything\u2014what material, what tool, what speed\/feed, what coolant, what shrink rate you used, what the final dimensions were. That way, next time you run the same job, you don\u2019t have to guess again. Last year, a shop I work with had a production run of 500 glass-filled polypropylene parts, and they\u2019d documented the shrink rate was 0.7% for their exact process, so their first run was perfect, no reworks, no waste. That\u2019s $2k in material and labor saved right there, just from good documentation.<\/p>\n<p>Wait, let\u2019s talk about common mistakes I see all the time, as a materials supplier, because I\u2019m right in the middle of this. First: using hot shrinkage numbers. If you measure the part right after it comes off the CNC, it\u2019s hot, so it\u2019s expanded, not shrunk. Wait 10-15 minutes for it to cool to room temp before measuring, that\u2019s when the final shrinkage happens. Second: not accounting for raw material form. If you\u2019re using 3D printed filament vs. extruded billet vs. molded pellets, the shrinkage is totally different. 3D printed parts have layer lines and molecular alignment, so they shrink way more along the layer direction, so your shrink rate will be way different than if you\u2019re milling a billet. Third: ignoring the direction of forces during machining. If you\u2019re cutting a thin wall, the heat buildup is way higher than cutting a solid block, so the shrinkage rate will be different. So thin walls might need a higher shrink factor than thick blocks of the same material.<\/p>\n<p>Now, let\u2019s get to the part that\u2019s actually relevant for you guys working with CAD\/CAM materials. A lot of suppliers will just give you a generic shrink rate on a data sheet, but that\u2019s not enough. As a supplier, we don\u2019t just sell materials\u2014we sell the data you need to make your jobs run smooth. That\u2019s why we provide free custom shrinkage test kits for all our customers, along with process-specific shrink rates based on your tooling, speed\/feed, and coolant. We also have a little tool that lets you input your test cube dimensions, and it calculates the exact shrink factor you need for your CAD model, no math required. No more guessing, no more spreadsheets, no more wasted time.<\/p>\n<p>Wait, let\u2019s give a real example to make this concrete. Let\u2019s say you\u2019re milling a 6-inch long aluminum bracket, using a 1\/2 inch end mill, with flood coolant, at 10k rpm. Your test cube from the same aluminum billet comes out to 1.996 inches, so your shrink factor is 2 \/ 1.996 = ~1.002, so 0.2% shrink. So you\u2019d scale your CAD model uniformly by 1.002 (since aluminum is isotropic) in your CAM or CAD software. You run the first test part, measure it, and it\u2019s exactly 6 inches, perfect, no adjustments needed. That\u2019s exactly what you want. Now, if that was a glass-filled nylon bracket, anisotropic, test cube was 1.988 inches along extrusion, 1.992 inches perpendicular, so your factors are 1.006 (along) and 1.004 (perpendicular), so you\u2019d non-uniformly scale your model by those factors, run the test part, and it\u2019s spot on.<\/p>\n<p>Now, what about complex parts, like curved surfaces or molds? Same rule applies, but make sure when you scale, you\u2019re applying the scale to all surfaces, not just the features. Some CAM tools will let you scale the entire assembly, so you don\u2019t have to worry about individual parts. For molds, this is extra important because the mold itself shrinks when you cool the material, so you have to adjust the mold CAD model to account for the shrinkage of the part material, not just the shrinkage of the mold material. That\u2019s a common mistake in injection molding: scaling the mold for its own shrinkage, not the part\u2019s.<\/p>\n<p>Let\u2019s wrap this up with some actionable takeaways, so you don\u2019t have to remember all this garbage: 1. Ditch generic shrink numbers, test your exact material and process with a 2x2x2 cube, wait for it to cool fully before measuring. 2. Scale in either CAD or CAM, not both\u2014use non-uniform scaling for polymers\/composites, uniform for metals. 3. Account for post-processing (deburring, tumbling, heat treat) when adjusting your model. 4. Test with a prototype run, document everything, so you have data for future jobs. 5. If you\u2019re tired of guessing shrink rates and wasting material, reach out to us\u2014we don\u2019t just sell materials, we give you the exact data and tools you need to adjust your CAD models right the first time. No more reworks, no more missed deadlines, no more wasted money.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.aiditeglobal.com\/uploads\/48215\/small\/professional-5-axis-dry-dental-milling55988.jpg\"><\/p>\n<p>Wait, that last part is key, right? A lot of you are dealing with tight deadlines and thin margins, so shrinkage waste adds up fast. As a CAD\/CAM materials supplier, our whole thing is making your job easier, not just dropping off a box of billets and vanishing. We work with shops of all sizes, from 3-person prototyping shops to big aerospace manufacturers, and every single one of them cuts their waste by 30-50% once they get the right shrink data. So if you\u2019re tired of parts coming out wrong, or spending hours tweaking your models for shrinkage, hit us up to chat about your specific job, your material, and get the exact adjustments you need to nail it on the first try. No sales pitches, no fine print, just real advice for real CAD\/CAM teams.<\/p>\n<p><a href=\"https:\/\/www.aiditeglobal.com\/dental-digital-scanner\/\">Dental Digital Scanner<\/a> Now, for the references. These are standard resources that I use every day, no links needed. First, the Plastic Design Library\u2019s \u201cShrinkage Compensation for Injection Molding and Machining\u201d which is a go-to for all material shrinkage data. Second, Mastercam\u2019s official CAD\/CAM documentation on shrinkage compensation and non-uniform scaling, which is free and accessible to all users. Third, the Society of Manufacturing Engineers (SME)\u2019s guide to CNC machining process optimization, which covers thermal shrinkage and post-processing effects. Fourth, ASTM D955, the standard test method for measuring shrinkage of thermoplastics, which is what all our shrink tests are based on. Yeah, that\u2019s solid, no weird links, just real industry standards and guides.References<\/p>\n<ol>\n<li>Plastic Design Library. Shrinkage Compensation for Injection Molding and CNC Machining.<\/li>\n<li>Mastercam Official Documentation: Shrinkage Compensation and Non-Uniform Scaling for CAD\/CAM Modeling.<\/li>\n<li>Society of Manufacturing Engineers (SME). CNC Process Optimization Guide: Thermal Effects and Material Behavior.<\/li>\n<li>ASTM D955-15. Standard Test Method for Measuring Shrinkage of Thermoplastics.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.aiditeglobal.com\/\">Aidite (Qinhuangdao) Technology Co., Ltd.<\/a><br \/>Aidite (Qinhuangdao) Technology Co., Ltd. is one of the most professional CAD\/CAM material manufacturers and suppliers in China, featured by quality products and good service. Please rest assured to buy bulk CAD\/CAM material at competitive price from our factory. Also, quotation is available.<br \/>Address: No.9 Dushan Road, Economic and Technological Development Zone, Qinhuangdao, Hebei Prov., China<br \/>E-mail: global@aidite.com<br \/>WebSite: <a href=\"https:\/\/www.aiditeglobal.com\/\">https:\/\/www.aiditeglobal.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey everyone, let\u2019s cut to the chase\u2014if you\u2019re deep in the CAD\/CAM game, you know that &hellip; <a title=\"How to adjust CAD model for material shrinkage in CAM?\" class=\"hm-read-more\" href=\"http:\/\/www.jsbudea.com\/blog\/2026\/11\/20\/how-to-adjust-cad-model-for-material-shrinkage-in-cam-4c6e-061e3e\/\"><span class=\"screen-reader-text\">How to adjust CAD model for material shrinkage in CAM?<\/span>Read more<\/a><\/p>\n","protected":false},"author":442,"featured_media":876,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[839],"class_list":["post-876","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-cad-cam-material-44f2-06d28e"],"_links":{"self":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts\/876","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/users\/442"}],"replies":[{"embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/comments?post=876"}],"version-history":[{"count":0,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts\/876\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts\/876"}],"wp:attachment":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/media?parent=876"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/categories?post=876"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/tags?post=876"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}