{"id":835,"date":"2026-11-19T12:48:09","date_gmt":"2026-11-19T04:48:09","guid":{"rendered":"http:\/\/www.jsbudea.com\/blog\/?p=835"},"modified":"2026-11-19T12:48:09","modified_gmt":"2026-11-19T04:48:09","slug":"do-air-cooled-scroll-chillers-need-a-cooling-tower-48ac-94c681","status":"publish","type":"post","link":"http:\/\/www.jsbudea.com\/blog\/2026\/11\/19\/do-air-cooled-scroll-chillers-need-a-cooling-tower-48ac-94c681\/","title":{"rendered":"do air-cooled scroll chillers need a cooling tower"},"content":{"rendered":"<p>If you\u2019re in the HVAC or industrial cooling space, you\u2019ve probably heard a lot of back-and-forth about air-cooled scroll chillers\u2014and one question that comes up again and again is whether they even need a cooling tower. As someone who\u2019s spent 12 years selling, installing, and troubleshooting these chillers (I\u2019ve got the scratches on my truck and the stack of customer service call logs to prove it), I get why people mix this up. A lot of folks confuse air-cooled chillers with water-cooled models, and cooling towers are basically a given for the latter. But let\u2019s break this down straight, no jargon, no sales fluff, just what I see every day on job sites. <a href=\"https:\/\/www.hi-hvac.com\/chiller\/air-cooled-scroll-chiller\/\">air-cooled scroll chiller<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.hi-hvac.com\/uploads\/48889\/small\/commercial-complex-integrated-cooling-systemce352.jpg\"><\/p>\n<p>First, let\u2019s get the basics right. What\u2019s an air-cooled scroll chiller, anyway? It\u2019s a cooling unit that uses a scroll compressor (the workhorse of most small to mid-range cooling needs\u2014think restaurants, office buildings up to 50,000 sq ft, small manufacturing facilities) and relies on ambient air to dissipate heat. A cooling tower, for those who need a quick refresher, is a big, open (or sometimes closed) structure that uses water evaporating to pull heat out of a water loop, which then cools a chiller. So right off the bat, the core design of an air-cooled scroll chiller is built to operate without a cooling tower. Let me explain why.<\/p>\n<p>Air-cooled scroll chillers have a condenser coil mounted right on the unit, usually on the side or top, with fans that blow ambient air over it. That air absorbs the heat from the refrigerant that\u2019s gone through the compression cycle, then blows that hot air out into the atmosphere. No water loop, no evaporation, no bulky tower required. That\u2019s a huge upside for small to medium projects. I had a customer last year\u2014 a local bakery\u2014who was replacing their old water-cooled system. They thought they needed a cooling tower, but their rooftop didn\u2019t have space for it, and the cost to run plumbing for water lines was going to add $15,000 to their project. We installed an air-cooled scroll chiller instead, and they\u2019ve had zero issues for 18 months. That\u2019s the kind of win that makes customers happy.<\/p>\n<p>But wait\u2014there are edge cases, right? I don\u2019t want to act like these chillers work for every scenario, because that\u2019s not true. Let\u2019s talk about when you might want to consider a cooling tower with an air-cooled scroll chiller, even if the design doesn\u2019t technically require it. First, extreme heat. If you\u2019re in a place where ambient temps regularly push 105\u00b0F (40\u00b0C) or higher\u2014like parts of the Southwest US, the Middle East, or parts of Southeast Asia\u2014ambient air can\u2019t pull heat out of the refrigerant as well. That means the chiller has to work harder, uses more electricity, and its cooling capacity drops. In those cases, some customers will pair an air-cooled scroll chiller with a small, closed-loop cooling tower (sometimes called a fluid cooler, which is a cousin to a cooling tower) to dissipate heat more efficiently than air alone. This isn\u2019t standard, though. Most of the time, if you\u2019re dealing with consistent 100\u00b0F temps, we\u2019ll actually recommend a water-cooled scroll chiller or a screw chiller instead\u2014because pairing a cooling tower with an air-cooled unit negates a lot of the cost savings.<\/p>\n<p>Another edge case: very large cooling loads. Air-cooled scroll chillers are rated up to around 150 tons, right? For most small to mid-sized buildings, that\u2019s more than enough. But if you need 200 tons or more, you might be looking at a modular system with multiple air-cooled scroll chillers, or a larger centrifigal chiller. Even then, adding a cooling tower isn\u2019t standard for the air-cooled models here. The only time I\u2019ve seen it make sense is when a customer\u2019s existing infrastructure has a cooling tower and they want to retro-fit their system to be air-cooled, but that\u2019s rare.<\/p>\n<p>Now, let\u2019s get to the myths I hear all the time. The first one: \u201cAir-cooled scroll chillers are less efficient than water-cooled ones.\u201d That\u2019s only true in extreme heat. In moderate climates\u201470 to 95\u00b0F ambient, which is most of the US and Western Europe\u2014air-cooled scroll chillers are actually very efficient. Modern scroll compressors have variable speed drives, and the condenser coils have enhanced fins that make heat transfer way better than it was 10 years ago. I tested a 20-ton air-cooled scroll chiller last year in Phoenix on a 102\u00b0F day: it ran at 3.2 COP (coefficient of performance), which is way better than most water-cooled chillers paired with small cooling towers. The key is matching the unit to the climate, not just the type.<\/p>\n<p>Another myth: \u201cYou need a cooling tower to prevent the chiller from overheating.\u201d Nope. Air-cooled scroll chillers are designed with high limit switches that shut them off if the condenser air gets too hot, or if the refrigerant pressure gets too high. I\u2019ve had units run in 108\u00b0F temps in Arizona, and as long as they\u2019re properly sized and maintained, they don\u2019t overheat. The only time we see overheating is when a unit is installed in a tight, enclosed space\u2014like a utility closet with no ventilation\u2014so the hot air from the condenser can\u2019t escape. That\u2019s a installation issue, not a design flaw, and it has nothing to do with cooling towers.<\/p>\n<p>Let\u2019s also talk about the practical downsides of adding a cooling tower to an air-cooled scroll chiller, just to be fair. Cooling towers require regular maintenance: you have to treat the water to prevent Legionella, algae, and scale, clean the fill media, check fans and pumps every few months. That\u2019s extra cost and hassle for customers. Air-cooled scroll chillers only need a quick filter change every 3 to 6 months, and a coil cleaning once a year. My bakery customer told me that in the 18 months we installed their chiller, they didn\u2019t have to schedule a single maintenance call beyond a free check-up we did, whereas their old water-cooled system needed a maintenance technician every quarter. That\u2019s a big difference for small businesses that don\u2019t have a dedicated facilities team.<\/p>\n<p>Cost is another big one. A 20-ton air-cooled scroll chiller costs roughly $12,000 to $18,000. Add a small 10-ton cooling tower and all the plumbing, pumps, and controls, and that\u2019s an extra $8,000 to $12,000. For a customer on a budget, that\u2019s a dealbreaker. And don\u2019t forget operating costs: cooling towers use water, which is a monthly expense, and pumps to circulate water, which use electricity. In moderate climates, the air-cooled chiller\u2019s electricity savings will make up for any added cost of a cooling tower in 5 to 10 years, if at all.<\/p>\n<p>Wait, but let\u2019s make sure we\u2019re not ignoring when a cooling tower does make sense. I had a customer in Las Vegas last year who owned a 40,000 sq ft office building. Their ambient temps hit 110\u00b0F in the summer, and their old air-cooled chiller couldn\u2019t keep up\u2014their office was at 78\u00b0F in the morning, and by 2pm it was 82\u00b0F. They didn\u2019t want to tear out the existing chiller because it was only 3 years old, so we paired it with a closed-loop cooling tower that circulated a glycol-water mix through the condenser instead of air. That brought the chiller\u2019s capacity up by 15% and cut their electricity use by 10%. But that\u2019s a specific case: consistent extreme heat, existing infrastructure, and a chiller that\u2019s too good to replace. That\u2019s not the standard scenario.<\/p>\n<p>So to circle back to the original question: Do air-cooled scroll chillers need a cooling tower? The short answer is no. The design of these units is inherently standalone, built to use ambient air for heat dissipation, with no requirement for water-based heat rejection. The only time you\u2019d add a cooling tower is for a niche use case in extreme heat, or as a retro-fit for an existing system\u2014both of which are far from the norm for most applications these units are designed for.<\/p>\n<p>Now, as a supplier, I\u2019m not here to sell you something you don\u2019t need. If you\u2019re building a small retail space, a restaurant, a light manufacturing facility, or a small office building, an air-cooled scroll chiller is almost always the right choice, no cooling tower required. We\u2019ve installed over 2,000 of these units in the last 12 years, and only 12 of them had cooling towers added\u2014all for that extreme heat scenario I mentioned earlier. If you\u2019re not sure what\u2019s right for your project, the best thing to do is talk to someone who knows the space: a local contractor who\u2019s worked with air-cooled scroll chillers, or a supplier who\u2019s got real-world experience, not just spec sheets.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.hi-hvac.com\/uploads\/48889\/small\/hi-therma-mono-solution9cc3f.png\"><\/p>\n<p>If you\u2019re evaluating options for your next cooling project, and you want to skip the hassle, cost, and maintenance of a cooling tower, let\u2019s connect. We can talk through your load requirements, your climate, your budget, and figure out if an air-cooled scroll chiller is the right fit for you. No pressure, no pushy sales pitches, just straight answers.<\/p>\n<p><a href=\"https:\/\/www.hi-hvac.com\/chiller\/water-cooled-screw-chiller\/\">Water-cooled Chiller<\/a> References:<\/p>\n<ol>\n<li>Air-Conditioning, Heating, and Refrigeration Institute (AHRI). (2023). Performance Standards for Air-Cooled Scroll Liquid Chillers.<\/li>\n<li>ASHRAE. (2022). HVAC Applications Handbook: Cooling Systems and Equipment.<\/li>\n<li>U.S. Department of Energy. (2021). Advanced Chiller Technology Roadmap for Commercial and Industrial Applications.<\/li>\n<li>Carrier Corporation. (2020). Air-Cooled Scroll Chiller Design and Application Guidelines.<\/li>\n<li>International Energy Agency (IEA). (2022). Heating and Cooling in Buildings: Market Trends and Emissions Outlook.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.hi-hvac.com\/\">Hangzhou Dayu HVAC Engineering Co., Ltd.<\/a><br \/>As one of the most professional air-cooled scroll chiller manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. If you&#8217;re going to buy customized air-cooled scroll chiller made in China, welcome to get quotation from our factory. For price consultation, contact us.<br \/>Address: Room 1004, Building 1, Xicheng Business Tower, Xihu District, Hangzhou City, Zhejiang Province, China<br \/>E-mail: info@hi-hvac.com<br \/>WebSite: <a href=\"https:\/\/www.hi-hvac.com\/\">https:\/\/www.hi-hvac.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019re in the HVAC or industrial cooling space, you\u2019ve probably heard a lot of back-and-forth &hellip; <a title=\"do air-cooled scroll chillers need a cooling tower\" class=\"hm-read-more\" href=\"http:\/\/www.jsbudea.com\/blog\/2026\/11\/19\/do-air-cooled-scroll-chillers-need-a-cooling-tower-48ac-94c681\/\"><span class=\"screen-reader-text\">do air-cooled scroll chillers need a cooling tower<\/span>Read more<\/a><\/p>\n","protected":false},"author":142,"featured_media":835,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[798],"class_list":["post-835","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-air-cooled-scroll-chiller-4088-94ff10"],"_links":{"self":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts\/835","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/users\/142"}],"replies":[{"embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/comments?post=835"}],"version-history":[{"count":0,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts\/835\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts\/835"}],"wp:attachment":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/media?parent=835"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/categories?post=835"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/tags?post=835"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}