{"id":732,"date":"2026-11-09T22:20:00","date_gmt":"2026-11-09T14:20:00","guid":{"rendered":"http:\/\/www.jsbudea.com\/blog\/?p=732"},"modified":"2026-11-09T22:20:00","modified_gmt":"2026-11-09T14:20:00","slug":"what-is-the-cogging-torque-of-the-2810-motor-4253-031b48","status":"publish","type":"post","link":"http:\/\/www.jsbudea.com\/blog\/2026\/11\/09\/what-is-the-cogging-torque-of-the-2810-motor-4253-031b48\/","title":{"rendered":"What is the cogging torque of the 2810 Motor?"},"content":{"rendered":"<p>When you\u2019re in the business of supplying 2810 Motors, one question we hear more than any other from engineers, product designers, and small-batch assembly teams is straightforward: \u201cWhat\u2019s the cogging torque of a 2810 Motor?\u201d It\u2019s a valid question\u2014because cogging torque isn\u2019t just a technical spec; it\u2019s the difference between a motor that runs smooth for hours on end and one that jitters, wastes energy, or fails to meet precision requirements. For our team, which has specialized in manufacturing and distributing 2810 Motors for over 7 years, this is a question we answer every single day, and it\u2019s time to break it down clearly, without all the jargon that muddles so many motor specs online. <a href=\"https:\/\/www.xpfpv.com\/fpv-drone-motor\/2810-motor\/\">2810 Motor<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.xpfpv.com\/uploads\/47922\/small\/mark4-v2-10-inch-fpv-hexacopter-frame202606150351072d2f5.jpg\"><\/p>\n<p>First, let\u2019s cut through the confusion: cogging torque is a natural, unavoidable force in permanent magnet brushless DC (BLDC) motors\u2014 and 2810 Motors are no exception. The name comes from the way the motor\u2019s stator (the stationary part with wire coils) and rotor (the rotating part with permanent magnets) align. Every time a pair of stator teeth lines up with a magnet on the rotor, a small magnetic attraction pulls the rotor into place, creating a tiny, repeatable \u201ccog.\u201d This isn\u2019t a flaw in the motor; it\u2019s a result of how BLDC motors are designed to work. The problem is that too much cogging torque causes issues for applications that rely on smooth motion: think drone gimbals, small robotic actuators, portable medical devices like insulin pumps, or 3D printer extruders\u2014all common uses for the compact 2810 form factor.<\/p>\n<p>Now, to the core question: what is the cogging torque of a standard 2810 Motor? The 2810 designation refers to the motor\u2019s physical size: 28mm in diameter, 10mm in length. For our 2810 Motors, the typical nominal cogging torque ranges from 1.2 to 2.5 mN\u00b7m (millinewton-meters). Wait, let\u2019s put that number in perspective to make it meaningful for someone who might not work with torque specs daily. A millinewton-meter is 1\/1000 of a standard Newton-meter\u2014for context, the force to lift a small paperclip is roughly 0.001 N\u00b7m, so our 2810 Motor\u2019s cogging torque is equivalent to the force needed to lift a 1.2 to 2.5 kilogram weight with a lever 1 meter long, applied to the motor\u2019s axis. That might sound small, but for a 10mm-long, 28mm-wide motor powering a high-precision drone gimbal or a tiny robotic gripper, that tiny vibration can translate into blurry camera footage or misaligned part placements.<\/p>\n<p>But here\u2019s the part most suppliers won\u2019t tell you: that number isn\u2019t one-size-fits-all. At our company, we don\u2019t ship a single \u201cgeneric\u201d 2810 Motor\u2014we offer three tiers of cogging torque performance tailored to use cases, because one spec doesn\u2019t work for every project. The base tier, which makes up 60% of our shipments for hobbyist and entry-level applications, has a cogging torque of 2.1 to 2.5 mN\u00b7m. This is our most affordable option, optimized for applications where vibration is a minor concern or where a small amount of cogging is counteracted by other system components. The mid-tier, which targets professional hobbyists and light industrial projects like small 3D printers, runs 1.5 to 2.0 mN\u00b7m. These motors use slightly tighter tolerances on stator lamination and magnet placement to reduce cogging, making them far smoother than the base tier without a big jump in cost. Our premium tier, for aerospace, medical, and robotics applications, has a cogging torque of less than 1.2 mN\u00b7m. For this level, we use skewed stator teeth and custom magnet shaping to eliminate almost all cogging\u2014we\u2019ve measured some units at 0.8 mN\u00b7m, which is barely perceptible even at high speeds.<\/p>\n<p>A lot of customers come to us thinking that lower cogging torque is always better, but that\u2019s not true either. Cogging torque is a trade-off, and no motor manufacturer can eliminate it entirely (if they say they can, they\u2019re not being honest). To reduce cogging, we have to adjust other factors: tighter manufacturing tolerances increase cost, skewed stator design can slightly reduce the motor\u2019s maximum torque output, and custom magnet shapes extend lead times. For example, a customer building a budget drone for casual photography doesn\u2019t need 0.8 mN\u00b7m cogging\u2014they\u2019d pay 30% more for a premium motor that delivers performance they\u2019ll never notice, while a small robotic surgical tool can\u2019t afford even 1.5 mN\u00b7m of vibration that could harm a patient. That\u2019s why we work closely with every customer to match their motor\u2019s cogging torque to their actual needs, not a generic spec sheet.<\/p>\n<p>Let\u2019s talk about how we test cogging torque for our 2810 Motors, because that\u2019s where a lot of suppliers cut corners. We don\u2019t rely on theoretical calculations\u2014we test every motor in a custom test rig that measures the exact torque required to turn the rotor at 0 rpm, which is the point where cogging is most prominent. Our test rig has a resolution of 0.05 mN\u00b7m, so we can catch even small variations that might affect performance. For the base tier, we allow a maximum of 2.5 mN\u00b7m, but in practice, 95% of our base tier motors come in at 2.2 to 2.4 mN\u00b7m\u2014we have such tight quality control that we almost never ship a motor at the upper limit. For the premium tier, 98% of units are below 1.1 mN\u00b7m, and we reject any that don\u2019t meet the spec, no exceptions. This is a big difference from smaller suppliers who might test a sample of a batch and ship the rest, even if individual units have higher cogging torque.<\/p>\n<p>Another point that comes up often: how does cogging torque affect a 2810 Motor\u2019s real-world performance? We hear from customers all the time who tell us that their drone\u2019s gimbal shakes when using a cheap 2810 Motor from another supplier, and that\u2019s almost always due to high cogging torque. When the motor is running at low speeds (like the 50-100 rpm common for gimbals), the cogging force creates a periodic vibration that\u2019s noticeable in the final product. At higher speeds (like the 10,000 rpm used for small drone propellers), the cogging becomes less of an issue because the rotor\u2019s inertia smooths out the small forces. But for precision applications that run at low speeds, cogging torque is a make-or-break spec. For example, a customer building a lab automation device that moves a microplate with micron-level precision told us that their old 2810 Motors would leave a 20-micron gap between wells, but switching to our premium low-cogging 2810 Motors fixed that gap entirely. That\u2019s the kind of impact a single spec number can have on a product.<\/p>\n<p>Now, let\u2019s address common misconceptions about 2810 Motor cogging torque. Some people confuse cogging torque with detent torque, which is another spec\u2014detent torque is the torque needed to turn the rotor when no current is applied, while cogging torque is the inherent attractive force between stator and rotor magnets. They\u2019re related, but not the same, and for 2810 Motors, detent torque is usually about 10% higher than cogging torque, a difference that matters for locked-rotor applications but not for most running motors. Others think that a larger motor automatically has higher cogging torque, but that\u2019s not the case\u2014design, not size, is the main driver. We\u2019ve had customers switch from a different brand\u2019s 3010 Motor (larger diameter, longer length) with 3 mN\u00b7m cogging to our 2810 Motor with 1.2 mN\u00b7m, and they saw a big improvement in smoothness, even though the motor was smaller.<\/p>\n<p>At our company, we\u2019ve been supplying 2810 Motors for years, and we\u2019ve learned that the best way to answer \u201cwhat is the cogging torque of a 2810 Motor?\u201d is to not just give a number, but to explain what that number means for your application. We\u2019ve worked with hundreds of teams, from student builders making their first drone to medical device companies testing a new portable insulin pump, and we help every one of them pick the right cogging torque tier without overspending or compromising on performance. If you\u2019re designing a product that uses a 2810 Motor, whether you\u2019re prototyping a new robotic arm, a compact camera gimbal, or a portable assembly tool, we can provide sample motors for testing, share our full test data, and adjust specs to match your exact requirements.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.xpfpv.com\/uploads\/47922\/small\/bldc-s2810-motor20260617015554642f3.jpg\"><\/p>\n<p>Don\u2019t settle for generic motor specs from suppliers who don\u2019t understand the unique needs of 2810 Motor applications. When you\u2019re ready to discuss your project, reach out to our team to talk through your cogging torque requirements, request a sample, or ask any other questions about motor performance. We\u2019re here to help you pick the right motor for your product, no matter how specific your needs are.<\/p>\n<p><a href=\"https:\/\/www.xpfpv.com\/fpv-drone\/8-inch-fpv-drone\/\">8 Inch FPV Drone\u200b<\/a> References<\/p>\n<ol>\n<li>Krishnan, R. (2010). Permanent Magnet Brushless DC Motor Drives and Controls. CRC Press.<\/li>\n<li>Bose, B. K. (2002). Modern Power Electronics and AC Drives. Prentice Hall.<\/li>\n<li>Miller, T. J. E. (1989). Brushless Permanent-Magnet and Reluctance Motor Drives. Oxford University Press.<\/li>\n<li>ABB Motion. (2021). \u201cCogging Torque in BLDC Motors: Causes, Effects, and Mitigation Strategies.\u201d Application Note.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.xpfpv.com\/\">Xpert Intelligent Equipment Co., Ltd.<\/a><br \/>Xpert Intelligent Equipment Co., Ltd. is one of the most experienced 2810 motor manufacturers and suppliers in China, also supports customized service. Please feel free to wholesale bulk discount 2810 motor in stock here from our factory. Quality products and reasonable price are available.<br \/>Address: Building 3, No. 65 Longhu Road, Longdong Community, Baolong Street, Longgang District, Shenzhen<br \/>E-mail: winnie@xpfpv.com<br \/>WebSite: <a href=\"https:\/\/www.xpfpv.com\/\">https:\/\/www.xpfpv.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>When you\u2019re in the business of supplying 2810 Motors, one question we hear more than any &hellip; <a title=\"What is the cogging torque of the 2810 Motor?\" class=\"hm-read-more\" href=\"http:\/\/www.jsbudea.com\/blog\/2026\/11\/09\/what-is-the-cogging-torque-of-the-2810-motor-4253-031b48\/\"><span class=\"screen-reader-text\">What is the cogging torque of the 2810 Motor?<\/span>Read more<\/a><\/p>\n","protected":false},"author":139,"featured_media":732,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[695],"class_list":["post-732","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-2810-motor-480a-035243"],"_links":{"self":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts\/732","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/users\/139"}],"replies":[{"embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/comments?post=732"}],"version-history":[{"count":0,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts\/732\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/posts\/732"}],"wp:attachment":[{"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/media?parent=732"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/categories?post=732"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.jsbudea.com\/blog\/wp-json\/wp\/v2\/tags?post=732"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}